Description
OVERLAND PLUS JT Short Rear Control Arms (4 Adjustable Arms). Over new Overland Plus control arms offer Giiro joints at both ends of your lower control arms, and frame side of the uppers. The Giiro Joint is a dual durometer, self centering joint, that is maintenance free.
The outside part of the bushing is softer, to isolate road noise and vibrations and allow the bushing to articulate. It has 13.3 degree of movement in each direction, or 26.6 degrees combined per bushing. Since we use these bushing at both ends, you have over 50 degrees of unrestricted movement.
The inside area of the bushing is harder and teflon infused to act as a bearing surface for the center pin which is free to twist as the suspension moves up and down. Combined with our 1/4 wall lower control arm tubing, premium tube inserts, 5/16s thick welded lower control arm housing and a forged adjusters, you have the Ultimate control arms available.
And with our Lifetime warranty, these are the best and last set of control arms you will need.
COR-1710102 – JT Rear Lowers
Center to Center STOCK = 23.750 inch
Center to Center MIN = 23.4375 inch
Center to Center MAX = 25.125 inch
COR-1710103 – JT Rear Uppers
Center to Center STOCK = 16.375 inch
Center to Center MIN = 16.0625 inch
Center to Center MAX = 17.4375 inch
All Clayton Off Road Inc. control arms carry a lifetime, no questions asked warranty against bending or breaking.
Product Features:
4 Adjustable Control Arms
Maintenance Free Giiro Joints
Dual Durometer, Self-Centering Bolt In Design
GIIRO Joints To Isolate Road Noise and Vibration
Lifetime Warranty
Made in the USA!
